Friday, October 28, 2011

B. Tech - I Year (Lessson Plan & Topics)



ENGINEERING MECHANICS:

Lesson Plan:

No of class
Topics to be Covered
1
Introduction to Engineering Mechanics, Applications of Mechanics in day to day life.
2
Classification of Mechanics - Statics / Dynamics, Definition of force, Vector Notation, components of the force
3
Law of Transmissibility of force, Resultant, equilibrant
4
Resultant of concurrent force system, triangle law of force addition, polygon law of force addition
5, 6, 7
Problems on Resultant of concurrent forces
8
Moment of the force  and  its application
9
Varignon’s theorem, Problems
10
Couple and equivalent force couple system
11,12
Resultant of Parallel  force  and problems
13
Resultant of non concurrent non parallel forces
14 to 18
Problems
19, 20
Forces in space, resultant of concurrent forces in space


Topics:

1.    Introduction
a.    Definition
b.    Group of Mechanics
                                          i.    Classical / Newtonian Mechanics
                                         ii.    Relativistic Mechanics
                                        iii.    Quantum Mechanics / Wave Mechanics
2.    Classification of Mechanics
a.    Mechanics of Solids
                                          i.    Mechanics of Rigid Body
1.    Statics
2.    Dynamics
a.    Kinematics
b.    Kinetics
                                         ii.    Mechanics of Deformable Body
1.    Theory of Elasticity
2.    Theory of Plasticity
b.    Mechanics of Fluids
3.    Basic Terminologies
a.    Mass
b.    Time
c.    Space
d.    Length
e.    Displacement
f.     Velocity
g.    Acceleration
h.    Momentum
i.      Continuum
j.      Rigid Body
k.    Particle
4.    Laws of Mechanics
a.    Newton’s First Law
b.    Newton’s Second Law
c.    Newton’s Third Law
d.    Newton’s Law of Gravitation
e.    Law of Transmissibility of Forces
f.     Parallelogram law of forces
g.    Derived Laws
5.    Units
a.    Unit of Forces
                                          i.    MKS
                                         ii.    FPS
                                       iii.    SI
b.    Unit of Constant of Gravitation
c.    Scalar vs Vector
6.    Characteristics of a Force
7.    Forces
a.    Coplanar or Non-coplanar
b.    Concurrent or Non-concurrent
c.    Parallel or Non-parallel
8.    System of Forces
a.    Coplanar (2-D)
                                          i.    Collinear
                                         ii.    Concurrent
                                        iii.    Parallel
                                       iv.    Non-concurrent Non-parallel
b.    Non-coplanar (Space or  3-D)
                                          i.    Concurrent
                                         ii.    Parallel
                                        iii.    Non-concurrent Non-parallel
9.    Resultant of System of Forces
a.    Coplanar Concurrent Force System
                                          i.    Resolution of Forces
                                         ii.    Composition of Concurrent Forces by Method of Resolution
b.    Coplanar Non-concurrent System
                                          i.    Moment of a Force
                                         ii.    Varignon’s Theorem
                                        iii.    Couple
                                       iv.    Resolution of Force into a Force and a Couple
                                        v.    Resultant of Force Systems
                                       vi.    X and Y intercepts of Resultant
c.    Concurrent Force System in Space

Monday, October 24, 2011

Surveying : Assignment 2 (II Year)

  

UNIT- I: INTRODUCTION AND CHAIN SURVEYING

  1. Define Surveying.

  1. State two primary divisions of surveying.

  1. State the basic principles of surveying.

  1. State the basic assumptions of plane surveying.

  1. Differentiate between plan and map.

  1. Enumerate the essential elements of a map.

  1. What are the classifications of survey?

  1. Define “significant figures” and “rounding off” of a measurement. Explain their relevance in surveying.

  1. List the different types of errors in survey measurement and state their significance

  1. Describe how you would range a survey line between two stations which are not inter-visible?

  1. What are the equipments used to measure right angle in the chain surveying?

  1. Enumerate the instruments used for measurement of lengths of survey lines

13.   Distinguish between perpendicular offset and oblique offset, with neat sketches.

  1. Which of the following scale is the smallest and largest respectively:

(i)  1 cm = 10 meter. (ii) 1: 10,000. (iii) R.F=1/100, 000 (iii) 1cm=1000 Km

  1. The distance between two stations were repeated 10 times and observed to be as follows: 500.335m, 500.360m; 501.345m, 500.395m, 500.420m, 500.355m, 500.315m, 500.360m, 500.415m, and 500.325m. Justify, if there is any observation having gross error.

  1. Illustrate with neat sketches, various types of obstacles encountered in chain surveying.

  1. A survey line PQ intersects a pond. To overcome these obstacle two stations A and B were taken on either side of the pond. A line AC, 90 m long was laid down on the left of AB, and a second line AD, 130 m long was laid down on the right of AB. If points C, B and D are on the same straight line and CB = 75 m and BD = 78 m, determine the length AB.

UNIT- II: COMPASS SURVEYING AND PLANE TABLE SURVEYING

18.  Tabulate the differences between different types of meridians along with differences in their utilities.

19.  What is magnetic declination?

  1. What do you understand by plane table survey? What are the advantages and dis-advantages of Plane Tabling? List the different accessories used in plane tabling along with their uses.

  1. Describe the steps involved in setting up of a Plane Table.

  1. Explain the different operation involved in temporary adjustment of plane table surveying.

  1. Enumerate the different types of plane tabling and highlight the topographical conditions under each is generally used.

  1. Describe the method of orientation of plane table by Back sight method.

  1. Define "three point problems" in Plane Tabling.

  1. What do you understand by "Trial and Error" method of solving three point problems?

  1. Explain the basic Lehmann's Rule for reducing the number of trials. Further, state the additional rules for special cases.

  1. Define Bearing.

  1. Define Dip and Declination

  1. Define local attraction

  1. Define W.C.B.

  1. What is the use of plane table Survey?

  1. Draw and explain the prismatic compass.

  1. Write merits and demerits of the plane table.

  1. Explain the instruments used in plane table surveying

  1. Explain two point problem with diagram

  1. Explain Bessel’s method with diagram.

  1. Define ‘bearing of lines’ and ‘true meridian’ in compass surveying.

  1. What is ‘orienting the table’ in plane table surveys?

  1. What do you understand by Quadrantal bearing of a line?

  1. What is plane table surveying? When is it preferred?

  1. A survey line AB crosses a river obliquely. P and Q are two points selected on the line one at each end of the river. Another line EPF is run parallel to the centre line of the river and point E is such that angle QEP is right angle and EP = PF = 100 m. A third point G is set at a distance of 150 m from P such that angle GFP is also right angle. Compute the distance PQ.

  1. The magnetic bearing of a line was found to be N 60° 30' W in 1992, when the declination was 5° 10' E. find its present magnetic bearing, if declination is 3° W.

44.  At what stations local attraction is suspected? Determine the correct bearings of the traverse legs and also calculate the included angles.

  1. What are the precautions to be adopted in using the Compass?

  1. The bearings of the sides of a traverse ABCDE are as follows :

Side
Fore bearing
Back bearing
AB
107º 15'
287º 15'
BC
22º 0'
202º 0'
CD
281º 30'
101º 30'
DE
189º 15'
9º 15'
EA
124º 45'
304º 45'

Compute the interior angles of the traverse.

UNIT- III: LEVELLING AND APPLICATIONS

47.  Why levels are usually called as “spirit level”?

  1. Explain the importance of level tube in a leveling instrument.

  1. Explain the chief feature of a digital level.

  1. State the differences in the temporary adjustment of a dumpy level and an IOP level.

  1. State the difference between a dumpy level and a digital level.

  1. Enumerate the order in which the permanent adjustment of a tilting level are carried out.

  1. Describe the two peg method of permanent adjustment of a dumpy level State and explain the basic principle of leveling.

54.  Enumerate the difference between rise and fall method (of reduction of level) and height of instrument method.

55.  Enlist the classification of leveling.

56.   What are the special features of precise system of leveling?

57.   What are the uses of contours?

58.  How do you compute the reservoir volume?

59.  Define sensitivity of a bubble tube. State any two factors affecting the same.

60.  Distinguish between differential leveling and reciprocal leveling

61.  What do you understand by reciprocal leveling

62.  What are the different types of ‘levelling instruments’ used in leveling.

63.  Data from a differential leveling have been found in the order of B.S., F.S..... etc. starting with the initial reading on B.M. (elevation 150.485 m) are as follows : 1.205, 1.860, 0.125, 1.915, 0.395, 2.615, 0.880, 1.760, 1.960, 0.920, 2.595, 0.915, 2.255, 0.515, 2.305, 1.170. The final reading closes on B.M.. Put the data in a complete field note form and carry out reduction of level by Height of instrument method. All units are in meters.

64.  A surveyor standing on seashore can just see the top of a ship through the telescope of a levelling instrument. The height of the line of sight at instrument location is 1.65 meter above msl and the top of ship is 50 meter above sea level. How far is the ship from the surveyor?

65.  In levelling between two points A and B on opposite banks of a river, the level was set up near A and the staff readings on A and B were 1.60 m and 2.44 m respectively. The level was then moved and set up near B, and the respective readings on A and B were 0.70 and 1.26. Find the true difference of level between A and B.

66.  Explain profile leveling with suitable example.

67.  Enlist and explain the types of errors in leveling.


  1. The following perpendicular offsets were taken from a chain line to a hedge :

Chainage in m
0
10
20
40
60
Offset in m
6.10
7.63
4.58
5.49
8.54

Calculate the area between the chain line and the hedge using Simpson’s method. 27. Write about the Prismoidal Correction to be applied to volume computation.

UNIT- IV: THEODALOITE SURVEYING

69.  Enumereate the different parts of a vernier theodolite and explain their function.

  1. Differentiate between Clamp screw and Tangent screw.

  1. What do you mean by temporary 'adjustment' of a theodolite ?

  1. Describe in breif the steps of temporary adjustment in proper order.

  1. Enumerate the fundamental lines of a theodolite instrument and state their relationship in a permanently adjusted instrument

  1. Explain the use of ‘Bowditch’s rule’ in traverse computation.

75.  Name the different cases of ‘omitted measurements’ in theodolite surveying.

  1. How is a simple curve set out by using one theodolite and one chain?

  1. Name the two methods of measuring horizontal angles using a theodolite.

  1. What is an anallatic lens?

  1. In order to reduce the error in measurement of vertical angle a set of measurements are taken and find the average angle as 9° 02' 05? form a height of instrument as 1.565m to a target height 2.165m. If the elevation of the instrument station is 189.250m above mean sea level, find the elevation of staff station. Assume any data, if required.

80.  State and explain omitted measurements in theodolite surveying.

  1. The interior angles of a closed traverse ABCDEF are as follows : , 60º 40'; , 201º 38'; , 93º 19'; , 69º 48'; , 210º 13' and , 84º 22'. Compute the deflection angles of the traverse.

UNIT- V: ENGINEERING SURVEYS

82.  Briefly explain ‘reverse curves’ and ‘shift of a transition curve’

83.  State the relationship between the radius of a curve and the degree of the curve.

84.  What are transition curves?

85.  Calculate the salient elements of the simple circular curve. Considering the chainage of point P to be 1000 m.

86.  Two tangents intersect at chainage 2380 m, the deflection angle being 50° 30'. Compute the necessary data for setting out a 5.7° curve to connect the two tangents if it is intended to set out the curve by Rankine's Method of tangential angles. Take the length of the normal chord as 30 m. Also, tabulate the values of the deflection angles for setting out with a theodolite having least count of 20".

87.  Two straights AB and BC meet at an inaccessible point B. They are to be connected by a simple circular curve of 500 m radius. Two points P and Q are selected on AB and BC respectively, and the following data are obtained: RAPQ = 157° 22' ; RCQP = 164° 38' ; PQ = 200 m.

88.  Calculate the necessary data for setting out the curve by the method of deflection angle. The nominal length of chord is 30 m. assume any data missing.

89.  A transition curve of length 230 m joins a straight to a circular curve of radius 800 m. What is the angle turned by the transition curve and what is the necessary shift?. Find the length of offset to the transition at a distance 150 m from the short along the tangent.

90.  Two straights AB and BC intersect at chainage 1000 m, the deflection angle being 40°. It is proposed to insert a right-handed circular curve 400 m radius with a cubic parabola of 90 m length at each end. The circular curve is to be set out with pegs at 20 m intervals and the transition curves at 10 m intervals. Find the

91.  Chainage at the begining and end of the combined curve

92.  Chainages at the junction of the transition curve with circular curves

93.  tangential angles for the first two points on the first transition curve

94.  tangential angles for the first two points on the circular curves

95.  Enumerate the classification of curves in engineering surveys.

96.  Two straights intersect at a deflection angle of 80? and are connected by a circular curve of radius 10 chains. Find the length of ‘each end tangent’, the ‘curve’, and the ‘long chord’, the Apex distance; the ‘Mid ordinate of the curve’ and the ‘Degree of the curve’.